Find the latest drivers,manuals,firmwares,user feedback,etc. Find the Compatibility Lists of VGA and MEMORY available for your Foxconn products(Only motherboard). Download manuals for 199 Foxconn motherboard models including operating instuctions, user manuals and product guides| page 2.
. This manual is the intellectual property of Foxconn, Inc.
Although the information in this manual may be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes. Trademark: All trademarks are the property of their respective owners.
HON HAI PRECISION INDUSTRY COMPANY LTD 66, CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C. Declares that the product Motherboard X38A is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) þ.
Declaration of conformity Trade Name: FOXCONN Model Name: X38A Industry Inc. Responsible Party: Address: 458 E.
Fullerton, CA 92835 Telephone: 714-738-8868 Facsimile: 714-738-8838 Equipment Classification: FCC Class B Subassembly Type of Product: Motherboard Manufacturer: HON HAI PRECISION INDUSTRY. Table of Contents Chapter Product Introduction Package List. 2 Main Features.3 Special Features.5 Layout. 7 Rear I/O Ports.8 Chapter Installation Instructions CPU. 10 Memory.12 Expansion Slots. 13 Connectors.
15 Jumpers. Table of Contents Chapter Directions for Bundled Software FOX ONE.50 FOX LiveUpdate. 57 FOX LOGO. 64 FOX DMI.65 Chapter RAID Configuration Introduction. 67 Installing Serial ATA Hard Disks.68 BIOS Configuration.68 RAID BIOS Configuration.
Attention: The pictures of objects used in this manual are just for your reference. Please refer to the physical motherboard. Attention: Please visit the Foxconn English website (com) to download the latest BIOS file and drivers for this motherboard. Chapter X38A is the first product in a new series called Digital Life. Di gital Life m ot herboard s c omb in e h igh -p erf orm an ce computing, wider options for accessing and managing other devices, and technologies which enable easy access to a world of digital entertainment via your PC. 1 X USB 2.0 x 2 ports and 1 x 1394a module Cables 6 X SATA Power and SATA Signal cables 1 X Ultra DMA 133/100/66 and Floppy Disk Drive cable Accessory I/O Shield 1 X Foxconn Optional Fan Application CD Foxconn motherboard support CD Documentation User Manual Easy Guide Note: If any of the above item is damaged or missing, please contact your retailer. Chapter 1 Product Introduction Main Features Supports Intel ® Core 2 Quad, Core Extreme, Core 2 Duo, Pentium ® Dual- Core E2xxx processors in an LGA 775 package Supports upcoming 45nm processors Northbridge: Intel ® Chipset Southbridge: Intel ® ICH9R Supports Front Side Bus(FSB) at Front Side Bus 1333MHz / 1066MHz / 800MHz.
Chapter 1 Product Introduction Supported by JMicron JMB363 ® Storage -2 x Ultra DMA 133/100/66 devices -2 x eSATA devices -RAID 0, 1, JBOD configuration Supported by ICH9R -6 x SATA devices -RAID 0, RAID 1, RAID 5, RAID 0+1 configuration with Intel ®. Chapter 1 Product Introduction Special Features ENGINEERED FOR PERFORMANCE COMPUTING Removes heat from the critical VRM, Cool Pipe North and South Bridge areas, increas- ing overclocking potential. Ferrite Choke Ferrite Choke design holds energy at a higher frequency than traditional iron cores, resulting in less power loss and more stability and performance capability for your system. Dual Digital Audio Dual Digital Audio enables you to configure up to 8 channels of audio between the two outputs, so you can isolate different sound sources on your Foxconn Digital Enables connection to Foxconn digital Connector entertainment and communications products, opening up a world of digital possibilities. Chapter 1 Product Introduction Layout Note: The above motherboard layout is provided for reference only, please refer to the physical motherboard. Chapter 1 Product Introduction Rear I/O Ports This motherboard provides the ports as below: 加个警告: Line in, Line out, Microphone, Rear, Center/Bass and Side Jacks Port 2-channel 4-channel 6-channel 8-channel Blue Linein Linein Linein Linein Green Lineout Front Speaker Front Speaker Front Speaker Pink Microphone.
Chapter 1 Product Introduction Chapter This chapter introduces the hardware installation process, in- cluding the installation of the CPU, memory, power supply, slots, and pin headers, an d the mount ing o f jumpers. Caution should be exercised during the installation of these modules. Please refer to the motherboard layout prior to any installation and read the contents in this chapter carefully. Chapter 2 Installation Instructions This motherboard supports Intel ® Core 2 Quad, Core 2 Extreme, Core Duo, Pentium Dual-Core E2xxx processors in an LGA775 package with Front ® Side Bus (FSB) of 1333/1066/800MHz.
For the detailed CPU support list on this motherboard, please visit the website: Installation of CPU Below is the CPU socket illustration. Chapter 2 Installation Instructions 3.
Hold CPU with thumb and forefinger. Ensure fingers align to socket cutouts. Match the CPU triangle marker to Pin 1 Alignment position as shown below. The align- ment key also provides the orientation directed function. Lower the CPU straight down without tilting or sliding the CPU in the socket. Chapter 2 Installation Instructions Memory This motherboard includes four 240-pin slots with 1.8V for DDR2 and two 240- pin slots with 1.5V for DDR3.
You must install at least one memory bank to ensure normal operation. For the detailed memory support list on this motherboard, please visit the website: The figures illustrate the location of the DDR2 and DDR3 DIMM slots: 240-pin DDR2 DIMM Slots. Chapter 2 Installation Instructions 2. Align the memory module to the DIMM slot, and insert the module vertically into the DIMM slot.
The plastic clips at both sides of the DIMM slot will lock automatically. Removing a DIMM 1.
Unlock the DIMM slot by press- ing the module clips outward. Chapter 2 Installation Instructions Installing an expansion card 1. Before installing the expansion card, read carefully the documentation that comes with and make the necessary hardware settings for the card. Make sure to unplug the power cord before adding any expansion cards, Remove the bracket on the corresponding position of the rear panel. Chapter 2 Installation Instructions Connectors This motherboard includes connectors for power supply, FDD device, IDE device, Serial ATA devices, USB devices, IR module, and others. Make sure that they have been installed properly prior to connecting the power supply.
24-pin ATX power connector: PWR1 PW R1 is the ATX power supply connector. Chapter 2 Installation Instructions Attention: Connect a 4-pin power We recommend you use 8-pin ATX 12V plug here power supply. If you want to use 4-pin power supply, you need to align the ATX power connector according to the right picture. Chapter 2 Installation Instructions Power LED Connector (PW RLED) Attach the connector to the power LED on the front panel of the case. The Power LED indicates the system’s status. W hen the system is in S0 status, the LED is on.
Chapter 2 Installation Instructions Serial Port Connector: COM1 This connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis. RLSD SOUT Empty. Chapter 2 Installation Instructions Empty +12V +12V TPB - TPB + TPA - TPA + F1394 IEEE 1394a Connector Fan Connectors: CPUFAN, SYSFAN, FAN1/2/3 There are five fan connectors on this motherboard. The fan speed can be detected and viewed in “Hardware Health Configure” section of the CMOS Setup.
Chapter 2 Installation Instructions Speaker Connector: SPEAKER The speaker connector is used to connect speaker of the chassis. Empty SPKJ SPEAKER Speaker Connector Audio Connector: CDIN The connector allows you to receive ste- reo audio input from sound sources such as a CD-ROM. Chapter 2 Installation Instructions INTRUDERJ INTR Chassis Intruder Connector Jumpers This section explains how to setup jumpers.
You should read the following content carefully prior to modifying any jumper settings. Attention The jumpers on the motherboard, pin 1 can be identified by the bold silkscreen next to it. Chapter 2 Installation Instructions Onboard Buttons CLSCMOS Button (Yellow) Reset Button (Black) Power on Button (Red) Onboard Buttons Power on and Reset Buttons: Power On / Off / Reset buttons are located directly on the motherboard PCB, so you can easily start and reset your system whilst testing it on the workbench. CLSCMOS Button: Easily reset CMOS on the workbench, when recovering from failed overclock attempt. Chapter 3 BIOS Description Chapter This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS param- eters are also provided.
You have to run the Setup Program when the following cases occur: 1. Chapter 3 BIOS Description Enter BIOS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer, when the following message briefly appears at the bottom of the screen during the POST (Power On Self Test), press. Chapter 3 BIOS Description 4. PCI/PNP Resource Management The system’s PCI/PNP settings and parameters can be modified through this menu.
Boot Configuration Features The menu is used for boot setting. Power Management Features Through this menu all the items of Green function features can be set up.
Chapter 3 BIOS Description 1. Standard BIOS Features Standard BIOS Features Menu vSystem Time / Date Use this item to change the system time and date. Highlight System Time or System Date using key. Enter new values through the keyboard with. Chapter 3 BIOS Description 2.1 IDE Configuration Scroll to this item and press to view the following screen: IDE Configuration Menu vSATA#1 / SATA#2 Configuration This item is used to configure SATA 1 / SATA 2. VConfigure SATA#1 as The option uses to set the type of SATA.
Chapter 3 BIOS Description 2.2 USB Configuration Scroll to this item and press to view the following screen: USB Configuration Menu vLegacy USB Support Legacy USB support refers to the USB mouse and USB keyboard support. Disabled: to prevent the use of any USB device in DOS or during system boot. Enabled: to allow the use of USB device during boot and while using DOS. Chapter 3 BIOS Description USB Mass Storage Device Menu vUSB Mass Storage Reset Delay Number of seconds POST waits for the USB mass storage device after start unit command. VEmulation Type This item is used to select the type of emulation used during the boot sequence. 2.3 SuperIO Configuration Scroll to this item and press.
Chapter 3 BIOS Description vSerial Port2 Mode This item is used to set the serial Port2 mode.The available setting values are: Normal, IrDA 1.6us and IrDA 3/16 bit. VIR Duplex Mode Select full or half duplex mode for serial port 2. VIRTX Pin Select This item allows BIOS to select transmit pin in normal condition or inverse the IRTX. Chapter 3 BIOS Description 2.5 Smbios Configuration Scroll to this item and press to view the following screen: Smbios Configuration Menu vSmbios Smi Support Enable SMBIOS SMI wrapper support for PnP function 50h-54h. 2.6 MPS Configuration Scroll to this item and press to view the following screen: MPS Configuration Menu vMPS Revision The BIOS support versions of the 1.1 and 1.4 of the intel multiprocessor. Chapter 3 BIOS Description 2.7 OBD Configuration Scroll to this item and press to view the following screen: OBD Configuration Menu v1394 Controller This item enables the onboard 1394 controller. VRTL8110 / RTL8111B Lan Controller This item is to activate the function of onboard RTL8110 or RTL8111 LAN controller.
Chapter 3 BIOS Description 3.1 North Bridge Configuration Scroll to this item and press to view the following screen: North Bridge Configuration Menu vMemory Remap Feature Enable to allow remapping of overlapped PCI memory above the total physical memory. VMemory Hole This reserves the 15MB to 16MB memory address space for use of ISA expan sion card. Chapter 3 BIOS Description vUSB Functions This item enable or disable USB function.
VUSB Port Configure The item is used to set USB port. VUSB 2.0 Controller This item is used to enable or disable the Enhanced Host Controller Interface for USB. Chapter 3 BIOS Description 4. PCI/PNP Resource Management PCI/PNP Resource Management Menu vClear NVRAM This sets the operating mode of the boot block area of the BIOS FLASH ROM to allow programming in the Yes setting. VPlug & Play O/S Set this value to allow the system to modify the settings for plug and play operating system support.
Chapter 3 BIOS Description vIRQ3 / 4 / 5 / 7 / 9 / 10 / 11 / 14 / 15 & DMA Channel 0 / 1 / 3 / 5 / 6 / 7 The items are for IRQ / DMA to decide whether or not to let PnP automatically configrate. Chapter 3 BIOS Description vAddOn ROM Display Mode Set this item to display addon ROM (read-only memory) messages. VBootup Num-Lock The item defines if the keyboard Num Lock key is active when the computer system is boot up. VPS/2 Mouse Support W hether to allow the system to use PS/2 Mouse while booting. Chapter 3 BIOS Description 5.3 Removable Drives Scroll to this item and press to view the following screen: Removable Drives Menu v1st Drive The item is used to specify the boot sequence from the available removable drives. Power Management Features Power Management Features Menu 6.1 APM Configuration Scroll to this item and press. Chapter 3 BIOS Description APM Configuration Menu vPower Button Mode This item specifies how the externally mounted power button on the front of the computer chassis is used.
VAdvanced Resume Event Controls Resume On PME# Disable / Enable PME to generate a wake event. Resume On PCIE-PME# Use this option to enable PCIE-PME to wakeup the system from a power saving mode. Chapter 3 BIOS Description 6.2.1 General ACPI Configuration Press to go to the following sub menu. General ACPI Configuration Menu vSuspend mode This item is used to select the ACPI mode used for system suspend. VRepost Video on S3 Resume This item is used to set if opened the repost video on S3 resume function, it allows the system to initialize the PCI BIOS POST from S3 (suspend to RAM) sleep mode. Chapter 3 BIOS Description vAMI OEMB table Set this value to allow AMI OEMB table enable support. VHeadless mode This option is used to update the ACPI FACP table to indicate headless operations.
6.2.3 Chipset ACPI Configuration Press to go to the following sub menu. Chipset ACPI Configuration Menu vEnergy Lake Feature This item is to activate the function of energy lake. Chapter 3 BIOS Description 7. BIOS Security Features BIOS Security Features Menu vChange Supervisor / User Password Install or change supervisor / user password. VUser Access Level This item is used to set user access level.
VClear User Password Press to clear user password. VPassword Check W hether to check the password. Chapter 3 BIOS Description 8. Fox Central Control Unit Fox Central Control Unit menu 8.1 CPU Configuration Scroll to this item and press to view the following screen: CPU Configuration Menu vSuper Clock Free Enables or disables CPU clock free.
It is available only when the CPU is not the XE CPU and EIST is enabled. Chapter 3 BIOS Description vAdjacent Cache Line Prefetch Enables or disables adjacent cache line prefetch function. VHardware Prefetcher Enables or disables hareware prefetcher feature. VIntel(R) Virtualization Tech Virtualization solutions allow a platform to run multiple operating systems and applications as independent virtual machines. Using virtualization capabilities, one computer system can function as multiple 'virtual'.
Chapter 3 BIOS Description vDRAM RAS# ro CAS# Delay This item allows you to select a delay time (in clock cycles) between the CAS and RAS strobe signals. VDRAM RAS# Precharge This item allows you to select the DRAM RAS precharge time (in clock cycles). VDRAM RAS# Activate to Prec This item allows you to select the DRAM RAS activate to precharge time (in clock cycles). Chapter 3 BIOS Description 8.6.
Miscellaneous. vPCI Clock Auto Detect This item is used to set whether allow the system to supply the PCI slot bus clock if system detected PCI add-on card on the slot.
VPCIE / CPU Spread Spectrum If you enable PCIE / CPU spread spectrum, it can significantly reduce the EMI (Electro-Magnetic Interference) generated by the system. Chapter 3 BIOS Description vFan Highest / Second / Third / Fourth / Lowest Setting Set Fan Highest / Second / Third / Fourth / Lowest Setting. Min is 0 and the Max is 100. Load Optimal Defaults Automatically sets all setup options to a complete set of default settings when you select this option.
Chapter 3 BIOS Description Save Configuration Changes and Exit? Ok Cancel appears in the window. Select Ok to save changes and exit. Discard Changes and Exit Select this option to quit setup without making any permanent changes to the system configuration. Chapter 4 Driver CD Introduction Chapter This chapter will introduce how to use bundled software.
This chapter provides the following information: FOX ONE FOX LiveUpdate FOX LOGO FOX DMI. Chapter 4 Directions for Bundled Software FOX ONE FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequency and fan speed at any time. With FOX ONE, you can modify system performance settings such as bus speed, CPU voltage, fan speed and other system performance options that are supported by the BIOS and you also can monitor hardware temperature, voltage, frequency and fan speed. Chapter 4 Directions for Bundled Software Toolbar Use the toolbar to navigate to other pages. Alert Lamp When the system is in healthy status, the alert lamp color is green.
And if the system is in abnormal status, the alert lamp color will turn red. Switch Button Click this button, it will simplify the interface to HW monitor information bar as the below figure shows. CPU’s loading. F.I.S calibration func- tion is optional. Homepage Click this button to visit Foxconn motherboard website. CPU Page - CPU Control This page is used to select and run the CPU frequency to determine the current performance level of the system.
Chapter 4 Directions for Bundled Software 3. Page - Frequency Control This page enables you to set memory and PCI Express frequency manually. Page Close this page Select the option you want to set Adjust manually Reset the changes Apply the changes 4.1 Limit Setting - CPU Temp. Chapter 4 Directions for Bundled Software 4.2 Limit Setting - Sys Temp.
This page helps you to set system high limit temperature and enable the alert function. Show current system temperature value Enable alert function when the system temperature is higher than high limit value Show current high limit value of system.
Chapter 4 Directions for Bundled Software 4.4 Limit Setting - Sys Fan This page enables you to set system low limit rpm (revolutions per minute) and enable the alert function. Show current system fan rpm value Enable alert function when the system fan is lower than low limit rpm value Show current low limit.
Chapter 4 Directions for Bundled Software 5. Voltage Page - Voltage Control This page is used to set CPU voltage, memory voltage and northbridge voltage manually. Go to Voltage page Select the option you want to set Adjust by manual Reset the changes Apply the changes 6.
Chapter 4 Directions for Bundled Software FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update the system BIOS online or locally. Drivers and utilities are aslo can be updated online. Supported Operating Systems: -W indows 2000 -Windows XP (32-bit and 64-bit) Windows 2003 (32-bit and 64-bit) -W indows Vista (32-bit and 64-bit). Chapter 4 Directions for Bundled Software 1.2 Local Update - Backup BIOS This page could backup your system BIOS.
Please click “Backup” and key in a BIOS name, then click “Save” to finish the backup operation. Key in a BIOS name Click here 1.3 Local Update - Update BIOS This page helps to update your system BIOS. Chapter 4 Directions for Bundled Software 2.1 Online Update - Update BIOS This page lets you update your system BIOS from Internet.
Click “start”, it will search for the new BIOS from Internet. Then follow the wizard to finish the update operation.
Chapter 4 Directions for Bundled Software 2.2 Online Update - Update Driver This page allows you to update your system drivers from Internet. Click “start”, it will search for the new drivers. Then follow the wizard to finish the update operation. Click here Current information Search new drivers. Chapter 4 Directions for Bundled Software 2.3 Online Update - Update Utility This page helps you to update utilities from Internet.
Click “start”, it will search for the new utilities. Then follow the wizard to finish the update operation. Click here Current information Search new utilities from Internet. Chapter 4 Directions for Bundled Software 3.1 Configure - option This page provides auto search options and version filter. After setting the auto search options, the utility will work in the background and the related information will show in a pop balloon notification. Click here Set auto search options. Chapter 4 Directions for Bundled Software 3.2 Configure - System In this page, you can set the backup BIOS location and change different skin of the utility.
Click here Set the location of download files or auto backup BIOS Select different skin of the software Reset to default value Determine if the FOX liveUpdate can. Chapter 4 Directions for Bundled Software 4. About & Help This page shows some information about FOX LiveUpdate. Click here Show information about FOX LiveUpdate FOX LOGO FOX LOGO is a simple and useful utility to backup, change and delete the boot Logo. Chapter 4 Directions for Bundled Software Warning: When you change Logo or delete current Logo, the system will flash BIOS file automatically. During this time, please DO NOT shut down the application and the system, or the motherboard will be damaged seriously.
FOX DMI FOX DMI is a full DMI information viewer, and it supports three kinds of DMI Data format: Report, Data Fields and Memory Dump. Chapter 5 RAID Configuration Chapter This chapter will introduce Intel ® RAID Configurations. This chapter provides the following information: Introduction Installing Serial ATA Hard Disks BIOS Configuration RAID BIOS Configuration Creating a RAID Driver Floppy Disk Install OS on HDD with RAID set. Chapter 5 RAID Configuration Introduction RAID (Redundant Array of Independent Disks) is a method of combining two hard disk drives into one logical unit. The advantage of an Array is to provide better performance or data fault tolerance. The motherboard comes with the Intel ICH9R. The following RAID configurations are provided for users.
Chapter 5 RAID Configuration Installing Serial ATA Hard Disks 1. Install SATA hard disks into the drive bays. Connect one end of the SATA cable to motherboard’s SATA onnectors and the end to SATA hard disk.
Connect SATA power cable to the power connector of SATA hard disk. BIOS Configuration 1.
Chapter 5 RAID Configuration 2. Enter a name for the RAID 0 according to the DISK/VOLUME INFORMATION and press to confirm. Press to switch to “RAID Level” item, and then use Up or Down arrow key to select RAID0 (Stripe), press to confirm.
Chapter 5 RAID Configuration 7. Key in the RAID volume “Capacity” value, then Press.
The default value indicates the maximum capacity. Select “Create Volume” and Press, a warning message will appear as below: Press to create the volume and return to the main menu. Chapter 5 RAID Configuration 3. Press to switch to “RAID Level” item, and then use Up or Down arrow key to select RAID1 (Mirror), press to confirm. Select “Disks” item and press to choose the hard disks that you want to configure as RAID 1.
Chapter 5 RAID Configuration 6. Key in the RAID volume “Capacity” value, then Press. The default value indicates the maximum capacity.
Select “Create Volume” and Press, a warning message will appear as below: Press to create the volume and return to the main menu. Chapter 5 RAID Configuration Press to create the volume and return to the main menu. Press to return to the “Create RAID Volume” menu. Attention: You will lost all data on the selected hard disk when you press to create the volume. Chapter 5 RAID Configuration Exiting the Intel ® Matrix Storage Manager Option ROM Utility 1. Exit” in main menu and press, The following message appears: Are you sure you want to exit?
Press to exit and press to cancel the operation. Creating a RAID Driver Floppy Disk It requires a floppy disk with RAID driver when installing W indows Vista/XP/2000 Operating System on HDD that is included in a RAID set.
Chapter 5 RAID Configuration 5. W hen the following picture appears, press and then follow the screen message to complete the OS installation. Attention: 1. Make sure the floppy disk drive works normally.
Formatting will erase ALL data on your floppy disk, so please take care. Catalyst Control Center: CrossFire Ready motherboard, such as Foxconn Digital Life Series: X38A CrossFire Edition graphics card that works as the master graphics card CrossFire. Appendix Power Extension Cable Step 5.
Correctly connect the DMS-59 cable to the DVI monitor connector and two graphics cards that you install as shown. Connect to master graphics card DMS Connect to monitor connector Connect to slave graphics card DVI connector Step 6. Appendix Now you can enjoy the advanced CrossFire technology. It is recommended to use 400-450 W power supply or above to enjoy the benefit of CrossFire technology. Two PCI Express x16 slots will work in x16 mode and one (Black) will work in x4 mode when you use CrossFire technology.
. A6GMV Series Motherboard User’s Manual. Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modified at any time, Foxconn does not obligate itself to inform the user of these changes. Trademark: All trademarks are the property of their respective owners. HON HAI PRECISION INDUSTRY COMPANY LTD 66, CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C. Declares that the product Motherboard A6GMV is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) ■.
Declaration of conformity Trade Name: FOXCONN A6GMV Model Name: Responsible Party: PCE Industry Inc. Address: 458 E. Fullerton, CA 92835 Telephone: 714-738-8868 Facsimile: 714-738-8838 Equipment Classification: FCC Class B Subassembly Type of Product: Motherboard Manufacturer: HON HAI PRECISION INDUSTRY. Installation Precautions ■ Electrostatic discharge (ESD) is the sudden and momentary electric current that flows between two objects at different electrical potentials. Normally it comes out as a spark which will quickly damage your electronic equipment. Please wear an electrostatic discharge (ESD) wrist strap when handling components such as a motherboard, CPU or memory.
TAble of CoNTeNTS Chapter 1 Product Introduction Product Specifications.2 Layout.4 Back Panel Connectors.5 Chapter 2 Hardware Install Install the CPU and CPU Cooler.8 Install the Memory.10 Install an Expansion Card.12 Install other Internal Connectors.13 Jumpers.16 Chapter 3 bIoS Setup Enter BIOS Setup.18. Configure.59 About & Help.61 FOX LOGO.62 FOX DMI.63 Chapter 5 RAID Configuration RAID Introduction.65 Install SATA Hard Disks.66 RAID Configuration.66 Create RAID Driver Disk.68 Install Windows OS.69 Technical Support: Support Website: Support Website. Thank you for buying Foxconn A6GMV Series motherboard.
Foxconn products are engineered to maximize computing power, providing only what you need for break-through performance. With advanced overclocking capability and a range of connectivity features for today multi-media computing requirements, A6GMV enables you to unleash more power from your computer. 1-1 Product Specifications Support AMD AM3 socket processors, Max processor power up to 95W For the latest CPU information, please visit: HyperTransport Up to 2000MT/s (HT1.0) for AM3 CPU Chipset North Bridge: AMD 690G South Bridge: AMD SB600 Memory 2 x 240-pin DDR3 DIMMs Support up to 8GB of system memory Dual channel DDR3 1333/1066 MHz architecture. Internal Connectors 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 4 x SATA connectors 2 x USB 2.0 connectors (supporting 4 x USB devices) 1 x CPU fan header (4-pin) 1 x System fan header (4-pin) 1 x Front Audio connector 1 x CDIN connector 1 x S/PDIFOUT connector.
1-2 layout 1. 4-pin ATX 12V Power Connector 12. Clear CMOS Jumper 2. SYSFAN Header 13. Front Panel Connector 3. North Bridge: AMD 690G 14.
SATA Connectors 4. PCI Express x1 Slot 15. South Bridge: AMD SB600 5. PCI Express x16 Slot 16. 1-3 back Panel Connectors LAN Port PS/2 Mouse Port Parallel Port Line In Line Out Microphone PS/2 Keyboard Port Audio Ports Serial Port USB Ports VGA Port 1.
PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse. RJ-45 lAN Port The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. Active Link Left: Active Right: Link LAN Type Status Description Status Description No Link No Link 10 Mb/s Connection 1000M Green Data Green 100 Mb/s Connection Blinking Activity. This chapter introduces the hardware installation process, including the installation of the CPU, memory, power supply, slots, pin headers and the mounting of jumpers. Caution should be exercised during the installation of these modules. Please refer to the motherboard layout prior to any installation and read the contents in this chapter carefully.
2-1 Install the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: ■ Make sure that the motherboard supports the CPU. ■ Always turn off the computer and unplug the power cord from the power supply before installing the CPU to prevent hardware damage. CPU socket lever back to its locked position. Install the CPU Cooler Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.) 2. Buckle the heatsink firmly at one 1. 2-2 Install the Memory Read the following guidelines before you begin to install the memory: ■ Make sure that the motherboard supports the memory.
It is recommended that memory of the same capacity, brand, speed, and chips be used. Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR3 DIMMs on this motherboard. Notch If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated by a notch in the middle, so it can only fit in one direction.
2-3 Install an expansion Card ■ Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. ■ Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage. 2-4 Install other Internal Connectors Power Connectors This motherboard uses an ATX power supply. In order not to damage any device, make sure all the devices have been installed properly before applying the power supply. 24-pin ATX power connector: PWR1 PWR1 is the ATX power supply connector. front Panel Connector: fP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators.
HDD-LED PWR-LED Hard Disk leD Connector (HDD-leD) RESET-SW PWR-SW Connect to the chassis front panel IDE indicator LED. It EMPTY indicates the active status of the hard disks.
This 2-pin connector is directional with +/- sign. Audio Connector: fAUDIo PORT1L AUDGND PORT1R PRESENCEJ The audio connector supports HD Audio standard. PORT2R SENSE1RETURN It provides the Front Audio output choice.
SENSESEND EMPTY PORT2L SENSE2RETURN FAUDIO Audio Connector: CDIN CDIN is a Sony standard audio connector, it can be CDL GND CDR connected to a CD/DVD-ROM drive through a CD/DVD audio cable. 2-5 Jumpers For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings.
Users should read the following content carefully prior to modifying any jumper setting. Description of Jumpers 1. This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. You have to run the Setup Program when the following cases occur: 1.
An error message appears on the screen during the sys- tem Power On Self Test (POST) process. enter bIoS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer, when the message 'Press to enter Setup, to boot menu'.
Appears at the bottom of the screen, you can press. ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System. ► BIOS Security Features The Supervisor/User password can be set up through this menu to prevent unauthorized use of your computer. ► SATA Channel 3 Not Detected ► SATA Channel 4 Not Detected Halt On All Errors But.
Keyboard Disabled Mouse Disabled Model Name:A6GMV BIOS Version:A11F1D03 System Memory Size:512MB MAC Address:00-00-00-00-00-30 ↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help. The system boot will not stop for a keyboard error if you enabled this item. ► Mouse The system boot will not stop for a mouse error if you enabled this item. ► Model Name Model name of this product. Advanced BIOS Features CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced BIOS Features IDE Detect Time Out 35 35 Help Item ► Boot Settings Configuration Press Enter Quiet Boot Enabled Select the time out Quick Boot Enabled value for detecting Bootup Num-Lock On. fox Central Control Unit CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Fox Central Control Unit Disabled BIOS Write Protection Disabled Help Item Auto Detect PCI Slot Disabled Options ► Smart BIOS Press Enter ► Fox Intelligent Stepping Press Enter ►. Smart bIoS CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Smart BIOS Smart Power LED Disabled Disabled Help Item Smart Boot Menu Enabled Options Current CPU Speed: 3100MHz, NB C1k:2000MHz Current DRAM Clock:N/A, 800 MHz Disabled Enabled ↑↓←→:Move Enter:Select +/-/:Value.
Fox Intelligent Stepping CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Fox Intelligent Stepping AMD Overclocking Configuration Help ltem CPU Clock Adjust 200 200 PCIE Clock Adjust 100 CPU Multiplier Adjust Auto Spread Spectrum Enabled Memory Clock Mode Auto ↑↓←→:Move Enter:Select +/-/:Value. Voltage Options CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Voltage Options CPU Voltage Control Disabled Disabled Help Item Memory Voltage Control Disabled Options Disabled +25mV +50mV +75mV +100mV +125mV +150mV +175mV +200mV +225mV +250mV +275mV +300mV +325mV +350mV ↑↓←→:Move Enter:Select +/-/:Value. Advanced Chipset Features CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Advanced Chipset Features Press Enter ► Memory Configuration Help Item ► DRAM Timing Configuration Press Enter CAS Latency(Tcl):N/A, 6 CLK RAS/CAS Delay (Trcd):N/A, 6 CLK Row Precharge Time(Trp):N/A, 6 CLK Min Active RAS (Tras).
allocated to the IGP is freed for other use. When installing an ATI PCIe graphics card, SurroundView is disabled by default. Enabling SurroundView in the BIOS enables the integrated UMA graphics controller, which in turn makes available up to two additional graphics outputs. When enabling the integrated UMA graphics controller, system memory will be reallocated. DRAM Timing Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. DRAM Timing Configuration DRAM Timing Configuration Help Item Options DRAM Timing Mode Auto Auto Auto DCT 0 DCT 1 Both ↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ►. Integrated Peripherals CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals OnBoard PCI IDE Controller Help Item Enabled OnChip SATA Channel Enabled OnChip SATA Type Native IDE DISABLED: disables the ► OnBoard Devices Press Enter integrated IDE ►. OnBoard Devices CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
OnBoard Devices Enabled OnBoard LAN Help Item OnBoard LAN Boot ROM Disabled Options HD Audio Controller Auto Disabled Enabled ↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ►. USB Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. USB Configuration USB Configuration Help Item Options Module Version - 2.24.2-13.4 USB Devices Enabled: Disabled None Enabled USB Controller Enabled Enabled USB 2.0 EHCI Controller Enabled Legacy USB Suppprt Enabled USB 2.0 Controller Mode FullSpeed. SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. SuperIO Configuration Configure ITE8721 Super IO Chipset Help Item 3F8/IRQ4 Serial Port1 Address 3F8/IRQ4 Allows BIOS to Select Parallel Port Address 378 Serial Port1 Base Parallel Port Mode Normal Addresses.
Power Management Setup CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. Power Management Setup S3 (STR) Suspend mode S3 (STR) Help Item Power Button Mode On/Off Energy-using Products Enabled Select the ACPI Wake on PME Enabled State used for Wake on USB Devices Enabled System Suspend. ► Suspend Type This item is used to set the energy saving mode of the ACPI function. When you select “S1 (POS)” mode, the power is always on and computer can be resumed at any time.
When you select “S3 (STR)” mode, the power will be down after a period of time. The status of the computer before it entering STR will be saved in memory, and the computer can quickly return to previous state when the STR function wakes.
PC Health Status CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. PC Health Status Warning Temperature Disabled Disabled Help Item Shut Down Temperature Disabled Options Case Open Warning Disabled CPU Temperature C/104 System Temperature C/86 Disabled C/122 CPU Fan Speed:2250 RPM C/131 System Fan Speed. bIoS Security features CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. BIOS Security Features Supervisor Password: Installed Help Item User Password: Installed Install or change the Change Supervisor Password Press Enter password. Press Enter User Access Level Full Access Change User Password Press Enter.
load optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS Load Optimal Defaults? Select this option and press Enter, it will pop out a dialogue box to let OK OK Cancel. The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Utility CD content ■ Install driver and utility ■ FOX ONE ■ FOX LiveUpdate ■. Utility CD content This motherboard comes with one Utility CD. You can simply put it into your CD/DVD-ROM drive, and the main menu will be displayed on your PC screen to guide you how to install.
Install Driver Use these options to install all the drivers for your system. You should install the drivers in order, and you need to restart your computer after all the drivers have been installed. Step Automatic Installation by One Click. Exit the program Click to visit Select to Select to Browse CD Drop to System Tray Foxconn's Install Utilities Install Drivers website 2. Install Utility You can select the specific utility to install. foX oNe FOX ONE is a powerful utility for easily modifying system settings.
It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time. With FOX ONE, you can: ■ Modify system performance settings, such as the CPU and memory bus speeds, CPU voltages, fan speeds, and other system performance options. Main Page Show CPU Toolbar Information Alert Lamp Switch Button Skin Button Exit Minimum Configuration Homepage Monitor Frequency/Voltage/Fan speed/Temperature value Toolbar Use the toolbar to navigate to other pages. Alert lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red. Click this button to exit the program.
Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen. Homepage Click this button to visit Foxconn motherboard website:. Configuration This menu allows you to configure: 1). Monitor interval (ms): This is to define the interval of different messages of system settings which are to be displayed on Simple Mode screen.
Minimum value is 1 second. Simple Mode: To select which message of system settings are to be displayed in the Simple Mode. Step 1: Click Calibration icon, a message pops out to ask for continue.
Step 2: After data is collected, it will ask you to restart your computer now. Later on, when the FOX ONE program is activated, and F.I.S. Feature (in CPU Page) is also enabled, FOX ONE will automatically adjust your CPU clock according to your system loadings. CPU Page - CPU Control This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves.
Manual: You can press the up/down button to adjust your CPU clock. You can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer. Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system. FOX Intelligent Stepping (F.I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings.
For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed. While in Energy Saving, CPU will lower down its speed to a minimum. Limit Setting 4.1 Limit Setting - CPU Temperature This page lets you to set CPU high limit temperature and enable the alert function. Go to Limit Setting Show current CPU page temperature value Enable alert function when the CPU temperature is higher than high limit value Show current high. 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. Show current CPU fan rpm value Enable alert function when the CPU fan runs slower than the low limit rpm value Show current low limit rpm value of CPU fan.
4.5 Limit Setting - FAN1 Fan This page lets you to set FAN1 fan low limit rpm and enable the alert function. Show current FAN1 fan rpm value Enable alert function when the FAN1 fan runs slower than low limit rpm value Show current low limit rpm value of FAN1 fan Set low limit rpm. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system. Go to Fan page Enable or disable smart fan function Set fan speed. FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems: ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■. 1-2 local Update - backup This page can backup your system BIOS.
You can click “Backup”, and key in a file name, then click “Save” to finish the backup operation. The extension of this backup file is '.BIN' for Award BIOS and '.ROM'.
Online Update 2-1 online Update - Update bIoS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS from Internet. Then follow the wizard to finish the update operation. Click here Current information Search new BIOS from Internet. Select the driver to update Browse detailed information Install the selected driver Close the window 2-3 online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet.
Then follow the wizard to finish the update operation. Click here Current information Search new utilities. 2-4 online Update - Update All This page lets you update your system drivers from Internet.
Click “start”, it will search all new BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation. Click here Current information Search all new BIOS/ drivers/utilities from Internet Browse detailed. Configure 3-1 Configure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a message on the task bar to inform you to do the next step. When you enable 'Auto Search FOX LiveUpdate', if your FOX LiveUpdate version is older, it will auto search from internet and prompt you to install the new version. Prompt you to install the new FOX LiveUpdate 3-2 Configure - System This page lets you set the backup BIOS location.
3-3 Configure - Advance This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not protective, and you must make sure the flash process is continuous and without any interruption. foX loGo FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo.
The boot Logo is the image that appears on screen during POST (Power-On Self-Test). You can prepare a JPG image (1024x768) file, then use FOX LOGO to open it and change the boot time Logo. foX DMI FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data formats: Report, Data Fields and Memory Dump. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred. Supporting Operating Systems: ■. This chapter includes the following information: ■ RAID Introduction ■ Install SATA Hard Disks ■ RAID Configuration ■ Create RAID Driver Disk ■ Install Windows OS.
5-1 RAID Introduction RAID 0 (Striped) RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array. The disk array data capacity is equal to the number of drive mem- bers times the capacity of the smallest member. 5-2 Install SATA Hard Disks 1.
Shut down your computer. Install SATA hard disks into the drive bays. Connect all the SATA power and SATA data cables. 5-3 RAID Configuration This motherboard supports RAID 0, RAID 1, RAID10 functions.
Hardware and software you may need here: ■. Create RAID array Here we create RAID 0 as an example: 1.
Press 2 in the main menu, 'Define LD Menu' appears and the 'LD 1' row is highlight, press Enter, the scree is shown as below: Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. Define LD Menu Define LD Menu LD No.
Delete RAID array 1. Press 3 in the Main Menu to enter the “Delete LD Menu”. Highlight the array you want to delete and press Del or Alt-D keys. Press Ctrl-Y if you are sure to delete the array or other keys to abort. Option ROM Utility (c) 2008 Advanced Micro Devices, Inc. 5-5 Install Windows oS Install Windows XP 1.
Press Del during POST to enter BIOS. Insert the Windows XP installation CD into the optical drive.
Set the “1st Boot Device” to “CD/DVD-ROM”, save changes and exit BIOS. Press F6 as soon as you see the message “Press F6 if you need to install a 3rd party SCSI or RAID driver”.